ContentsMotherboard Layout.41. Product Introduction.51.1. Feature Summary. I/O Back Panel and Connectors & Jumper Setting. I/O Back Panel. Connectors & Jumper Setting.

• Manual Woodworkers Wholesale
• Axper Xp K7vm333 Manual Woodworkers Machine

Hardware Installation.92.1. Installation of a LGA775 Pentium 4 CPU and Fan Sink. Installation of a LGA775 CPU. Installation of Fan Sink.112.2. Installation of Memory.

Installation of the Graphics Card. BIOS Setup.143.1. Setup Screen Features (BIOS version:E3).

Standard CMOS Features. Advanced BIOS Features. Integrated Peripherals.

Power Management Setup. PnP/PCI Configurations. PC Health Status. Frequency/Voltage Control. Load Fail-Safe Defaults.

Load Optimized Defaults. Set Supervisor/User Password. Save & Exit Setup. Exit Without Saving.

Driver Installation.26. Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:-Setup Driver/Application at first time:-Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press theCancel button if Windows detect the PCI Multimedia Audio device.Step 2. Insert the 'Realtek AC'97 Drivers & Applications' CD into the CD-ROMdrive and run the setup.exe program to finish the installation.Step 3.

Click on Next/OK/Go to continue the procedure. If the Windows popup'Digital Signature Not Found' message, press Yes to continue theinstallation.Step 4. Finally, select to restart the system and press Finish to completethe installation.The system will reload the drivers and do some adjustments in the INFfile if so required.-Setup for Manual-1. Double-click the 'System' icon to open the 'System Properties' dialog from Control Panel.2. Choose 'Hardware' tab and click the 'Device Manager' button.3.

Please right-click mouse on 'MultiMedia Audio Controller' and choose the 'Properties' menu itemto show the driver details.4. Click the 'Driver' tab and then click the 'Update Driver.' Button for update.5. Please follow the instructions of the 'Upgrade Device Driver Wizard'.6. Choose 'Search for a suitable driver for my device' and click the 'Next' button.7. Please specify the driver location/source and then click the 'Next' button in this case,'Specify a location' has been chosen.8.

If 'Specify driver location' is chosen, the Wizard will ask for the path where the driver is located.9. Click the 'Next' button to install Audio Driver on 'Driver Files Search Results'.10. If the 'Digital Signature Not Found' dialog is opened, click the 'Yes' button to continuethe Installation.11. After completing the above steps, the drier has been installed into the system.Please click 'Finish' button to complete the installation.-Update Driver/Application:-Step 1.

Manual Woodworkers Wholesale

Follow Step 2,3,4 described in Setup at first time above to completethe procedure.-Remove Driver/Application:-Step 1. Go to StartSettingsControl Panel.Step 2. Select Add/Remove Programs icon.Step 3.

Select 'Realtek AC'97 Audio' and press Change/Removebutton.Step 4. Click on Next/OK/Go to finish the uninstallation.Step 5. At the end of the procedure, select to restart the system and pressFinish to complete the uninstallation.-Setup Driver/Application at first time:-Ignore Step 1, and follow the same procedure in Win2000/WinME/WinXP.-Update Driver/Application:-The same procedure in Win2000/WinME/WinXP.-Remove Driver/Application:-The same procedure in Win2000/WinME/WinXP. How to use this RTLSetup Utility-For Windows ME:1. If the Operating System's New Hardware Wizard prompts you that'New Hardware Found' for the 'PCI Ethernet Controller', you shouldclick 'Next' until 'Finish' is clicked and without specifyinglocation of the driver.

You will see the 'PCI Ethernet Controller'in the Device Manager.2. Then you can install or update the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.You need to reboot the system immediately after the Install shieldcompletes the installation/upgrade.3. Do not click 'Cancel' during New Hardware Wizard searches for thedriver.4. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately.For Windows 2000/XP:1. If the Operating System's Found New Hardware Wizard prompts you that'New Hardware Found' for the 'Ethernet Controller', you should click'Next' until 'Finish' is clicked and without specifying location ofthe driver.

You will see the 'Ethernet Controller' in the DeviceManager.2. Then you can install or upgrade the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.3. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately if you want your networking to be re-installed. How to use this RTLSetup Utility-For Windows ME:1. If the Operating System's New Hardware Wizard prompts you that'New Hardware Found' for the 'PCI Ethernet Controller', you shouldclick 'Next' until 'Finish' is clicked and without specifyinglocation of the driver.

Axper Xp K7vm333 Manual Woodworkers Machine

You will see the 'PCI Ethernet Controller'in the Device Manager.2. Then you can install or update the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.You need to reboot the system immediately after the Install shieldcompletes the installation/upgrade.3. Do not click 'Cancel' during New Hardware Wizard searches for thedriver.4. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately.For Windows 2000/XP:1.

If the Operating System's Found New Hardware Wizard prompts you that'New Hardware Found' for the 'Ethernet Controller', you should click'Next' until 'Finish' is clicked and without specifying location ofthe driver. You will see the 'Ethernet Controller' in the DeviceManager.2. Then you can install or upgrade the NDIS driver with 'setup' or'setup -s' command:a) setup: The InstallShield will prompt you the steps to installor upgrade the driver.b) setup -s: The InstallShield will complete the installation orupgrade without prompting you any instruction.3. You can remove RTLSetup utility from Add/Remove Program Palette inControl Panel, the InstallShield will prompt you the steps to removethe driver. After remove the driver, please restart the systemimmediately if you want your networking to be re-installed.